Flumes and weir boxes are two of the most important tools that you could choose for your water management operation. However, if these flow measuring devices are located outdoors or in a similarly stressful location, it’s possible for them to suffer damage, reducing their effectiveness and lowering the success of your operation.
Fortunately, when you want to protect your flow measuring devices from the elements, you’ll find your perfect solution in covers for flumes and weir boxes. These tools provide the protection you need while allowing your operators to take consistent, accurate measurements. Read about the uses of flume covers and weir box covers, and learn about the different cover styles you can choose for your measuring tools.
Reasons to Use a Cover
If you’ve never used a flume cover in your management operation before, you may be unaware of the different reasons for installing this protective device. Before choosing a cover, it’s a good idea to learn about a few of the best reasons for choosing this useful tool.
One of the primary reasons for choosing a cover is reducing the risk of inflow, ensuring accurate flow readings. A flume or weir box cover can also be used to limit the possibility of foaming and to prevent foam from splashing outside of your flow measurement device. Finally, using a cover can increase the safety of your operators and defend your sensors from damage.
Using a Solid Cover
For most water management operations, the best choice for a weir box or flume cover is a solid cover. There are a wide variety of benefits of choosing a solid flume cover, including adding a uniform look for your flow measurement tools.
Typically, a solid flume cover will be constructed using stainless steel or aluminum. However, for increased utility, you might consider opting for fiberglass. If your system experiences a great deal of foot traffic, a solid cover can be an effective safety measure. Solid covers come in a variety of designs, including single piece, segmented, and hinged.
Picking a Transparent Cover
While a solid weir box cover is a good choice for many water management operations, you can also choose a transparent cover. Transparent covers tend to be smaller than solid covers, so they are mostly used on weir boxes instead of flumes.
The main benefit of choosing a transparent cover is that it allows your operators to have a clear view of the flow within your system, increasing your overall success. You also have the option of choosing a tint for your transparent cover so that your flow measurement tools are protected from damage caused by exposure to ultraviolet light.
Install a Flume Cover or Weir Box Cover
As you can see, one of the best ways to protect your system’s vital flow measurement devices is by installing a cover. If you’re interested in installing flume covers or weir box covers in your operation, you need to find a trusted source, which is why you should shop with Tracom, FRP.
Tracom specializes in producing top-quality fiberglass water management products, including covers for flumes and weir boxes. Request a quote from us today and get the water management tools you need for long-term success.