Common Errors in Flume Installations

Flumes are one of the most commonly used tools in water operation across the country, and if you use flumes in your system, then you know how important it is to install them properly. Unfortunately, a lot of things can go wrong in a flume installation that can affect the long term success of your operation. No matter the flume types you use, there are a few things that you should do to make sure your flume is installed correctly so that you can manage flow and take the consistently accurate measurements that your operation relies on.

Find out about some common errors in flume installation that can have a negative impact on the success of your water management system.

Getting the Elevation Wrong

When installing a flume, the primary concerns for most operations is correct orientation. However, there is an equally large issue that not as many operators are aware of: elevation. Any flume that you install in your system should have its floor slightly above or directly at the channel or pipe you’re installing in. If the elevation of your flume is incorrect, especially if it’s too low, you could be looking at serious problems, including total flume submergence. Make sure that your flumes are installed at the proper level and you’ll be saving yourself a lot of long term pain and aggravation.

Allowing Flow to Escape

Some flume installation tips are just common sense, but you might be surprised how often they go unheeded. For example, in any flow measurement operation, you must be sure that you’re measuring all of the flow. However, with an improper installation, it’s possible that some of your flow will escape, causing inaccurate readings that can sink a water operation. When installing your flumes, it is of the utmost importance that you capture all of the flow. Ensure that your transitions cover the entire channel and that they are watertight. Securing all of your flow will guarantee that your operation takes the accurate measurements that you need.

Constructing Your Flume Out of the Wrong Material

Besides the type of flume that you choose to use, a vital decision is what material your flume will be constructed from. While you might not realize, some flume materials are not suitable for all applications and can result in such issues as channel erosion and flume damage. Any flume that you install in your water management system should be made of a high quality of material like fiberglass that offers extreme durability and versatility. Choosing the right material will preserve the integrity of your flumes and improve your operational success.

Flume Installation is Easier with the Right Products

Maintaining the success of your water management operation is contingent on having the right tools at your disposal, including flumes. To make sure your flume installation is done correctly, you need the highest quality materials possible, and your number one source for great flumes and other water products is Tracom, FRP. We specialize in offering operations like yours the best in fiberglass water management materials that will increase your levels of success. Request a quote from Tracom today and get the flumes that your operation needs.

Tracom News

More Resources!

More Resources!

FRP
Fiberglass Reinforced Plastic

Why You Need Fiberglass Wastewater Solutions

All sorts of materials can be used for wastewater solutions like flumes and weir boxes, but nothing works quite like fiberglass. This reliable material is ...
Read More →
trapezoidal flume
Flumes

Why You Need A Trapezoidal Flume

While not the most popular kind of flume, the trapezoidal flume has much to offer that far too many don’t even consider. You’ll find a ...
Read More →